Spoke 4 – Coordinated by the Politecnico of Milan

FS companies involved: FS Engineering, Mercitalia Shunting & Terminal, Mercitalia Intermodal, Rete Ferroviaria Italiana, Trenitalia.

Spoke 4 objectives were characterised by a high level of multidisciplinarity, involving technical, managerial and economic aspects. In line with the Strategic Document for Passenger and Freight Rail Mobility delivered by MIMS, the Spoke objectives are summarised as following:

  • Promoting the development of moving block signalling systems (ETCS-L3) including satellite technologies for train positioning. In the same context, the migration from GSM-R to FRMCS represents a huge leap in terms of benefits, but also a challenge for cybersecurity, considering the introduction of Network Function Virtualisation (NFV).
  • Defining recognised quantitative methodologies for assessing the capacity of lines and nodes along corridors, through the development of Transport System Models (TSM) for HSR to quantify the regional gap and raise the quality of rail transport towards the EU average, in coherence with TEN-T, RFC corridors, core port nodes.
  • Infrastructure technologies and solutions for a sustainable development of national and TEN-T corridors, and strategic links for network improvement especially in Southern Italy.
  • Introducing low-carbon hydrogen for clean rail transport on non-electrified lines and improved energy management.
  • Developing two-mode and battery (and/or fuel cell) powered rolling stock, to be used on partially electrified lines, capable of short-range operation.
  • A rational use of energy for railway traction, through active electrical substation and traffic control.
  • Analysing the use of renewable energies within the railway infrastructure and its auxiliary systems, and producing and distributing green hydrogen.
  • Digitising rail transport, with predictive maintenance approaches based on big data analytics for safe and sustainable infrastructure maintenance, both with fixed and on-board systems. 
  • Effective, safe and efficient rail freight transport can also be achieved by monitoring of train efficiency and the deployment of automation in terminals and onboard trains during increasing portions of their commercial services.

Main projects with FS Group participation

  • Automation of Freight Terminal Operations
    The project was developed as part of a partnership between FS (Mercitalia Intermodal SpA, Mercitalia Shunting&Terminal Srl) and La Sapienza University of Rome. The main outcome achieved by this project was the construction of a virtual/physical demonstrator model for automated operations, from partial to total, in freight terminals, starting with the DAC with remote control by handlers.
  • AUTOR - Construction of a Self-Driving Site Vehicle 
    The main objective of this (Flagship) project, developed by FS (Rete Ferroviaria Italiana SpA) in partnership with Politecnico of Milan and the University of Parma, was the construction of a maintenance site vehicle, capable of moving and performing tasks independently, with only the supervision of the operator.
  • COMPASS - Study of compressive forces applied to three-bogie freight wagons 
    Purpose of this (Proof of Concept) project, developed by FS (Mercitalia Intermodal SpA) and Politecnico of Milan, was creating a virtual model for analysing the forces acting on a three-bogie railway wagon, and establishing a regulatory framework applicable to the above-mentioned wagons for their future large-scale adoption for rail freight transport.
  • Aerial drone for infrastructure inspections 
    Purpose of this project, developed by FS (Rete Ferroviaria Italiana SpA) in partnership with the Politecnico of Milan, was to build and use a BVLOS (VTOL) drone for managing railway traffic anomalies, remote inspections of both railway infrastructure (e.g. geometric surveys, state of the overhead contact line) and its barriers (e.g. efficiency of the rockfall protection networks, state of the vegetation) and for maintenance and safety purposes.
  • Renewable Energy for the Railway Sector 
    Purpose of this study, conducted by FS (FS Engineering Spa) in partnership with the Politecnico of Milan and the University of Naples, was contributing to decarbonisation through an efficient use of energy within the railway infrastructure. A further specific objective was the identification of possible guidelines and regulations for the railway sector, aimed at increasing decarbonisation.
  • Increasing Freight Train Safety
    Purpose of this project, developed by FS (Mercitalia Intermodal SpA) in partnership with Politecnico of Milan and La Sapienza University of Rome, was studying and creating an independent power supply system on board freight wagons to activate diagnostic data monitoring and acquisition sensors and transmitting data toward final maintenance processors. The overall objective is to increase the safety of freight transport through predictive maintenance.
  • Energy Infrastructures for Hydrogen Trains 
    Purpose of this study, conducted by FS (FS Engineering) in partnership with the Politecnico of Milan and the University of Naples, was studying optimal design criteria for fuel cells for hydrogen-powered trains, and to define the requirements for mobile refuelling stations.
  • MONORAIL - Intelligent diagnostics of intermodal transport through artificial intelligence algorithms
    Purpose of this project (Scalability), developed by FS (Mercitalia Intermodal SpA) in partnership with the Politecnico of Milan and the University of Palermo, was creating a new diagnostic system, validated by field tests and therefore scalable, capable of identifying malfunctions associated with freight wagon subsystems.
    The scalability of the project will allow a large-scale installation of the sensors on freight wagons and enable the optimisation of the entire asset life cycle.
  • Rail Circulation Optimiser 
    Purpose of this study, conducted by FS (Rete Ferroviaria Italiana SpA) in partnership with the Politecnico of Milan, was analysing optimisation algorithms for railway circulation based on Artificial Intelligence, Machine Learning, and neural networks, both in regular circulation conditions and in case of anomalies, for complex level systems. “Complex level” means the level where traffic volumes and the way they are handled and interchanged are considered strategic for the punctuality and regularity of operation of the entire railway network. The project also included a software implementation to support the traffic manager.
  • Augmented Reality for Staff Training
    Purpose of this project, developed by FS (Mercitalia Intermodal SpA) in partnership with the Politecnico of Milan and the CNR, was experimenting with and using augmented and virtual reality for training personnel involved in the maintenance and training of freight trains, as for improving working conditions and safety.
  • SAFER - Supervision system applied to construction site vehicles for workspace safety 
    Purpose of this project (Scalability), developed by FS (Rete Ferroviaria Italiana SpA) in partnership with the Politecnico of Milan, was implementing an intelligent supervision system (based on AI algorithms) of the vehicle construction workspace for safe infrastructure maintenance operations.
  • Reversible Electrical Substations 
    Purpose of this study, developed by FS (FS Engineering) in partnership with the Politecnico of Milan and the University of Naples, was analysing the main characteristics of reversible electrical substations, capable of storing the braking energy of rolling stock and making it subsequently available to the railway network and its users, contributing to the decarbonisation of the railway system.
  • Long Distance Freight Trains
    Purpose of this project, developed by FS (Mercitalia Intermodal SpA) in partnership with the Politecnico of Milan, the University of Florence and Intesa San Paolo, was creating an optimal traction control system, based on a co-simulation test bench (virtual/physical demonstrator), to identify the best position of locomotives within the freight train configuration.
  • Bimodal full-battery train
    Purpose of this project, developed by FS (Trenitalia SpA) in partnership with Hitachi Rail STS, was designing and building a battery-based energy storage system, to power trains that can run on lines with an overhead contact lines and charge the batteries, and on non-electrified lines where the train is powered by the storage system, connected to the propulsion system via a DC/DC power converter. The battery-based energy storage system was designed from an existing bi-modal diesel+electric train platform. Using batteries instead of the conventional diesel generator improves the train's sustainability, increasing its energy efficiency, through energy recovery during braking, and will cut down local and global CO2 emissions to zero. The system is already in operation on the Italian rail network and will soon be adopted by FS Group Companies in other European countries as well.
 

Spoke 4

18-19 June 2024
22° Nordic Seminar on Railway Technology

The seminar, which is held every two years in one of the Scandinavian countries, had as its theme this year "Developing technologies for a high capacity, integrated, environmentally friendly railway network".

31 May 2024
Projects for sustainable mobility: FS Italiane at the AICQ Conference

The event, entitled “The construction sector between now and the future. How the public contract code helps to innovate and manage sustainable processes in the construction of infrastructures”, held at the ANCE.